Ignition - Improved Distributor Cap & Rotor
87nissan10Models 1982-1986 Sentra &
1983-1986 Pulsar NX
Section Electrical System
Classification EL87-016
Bulletin No. TS87-139
Date September 21, 1987
DISTRIBUTOR CAP/ROTOR REPLACEMENT
APPLIED MODELS: 1982-86 Sentra (B11) 1983-86 Pulsar NX (N12)
SERVICE INFORMATION
Improved distributor caps and rotors have been developed for the Sentra (B11) and Pulsar NX (N12) models (all Federal and California production). Use the distributor part number stamped into the distributor housing in conjunction with the following chart to select the correct replacement caps and rotors. Where specified on the chart, cap, rotor and shield plate should be replaced as a set for optimum performance.
UPDATED APPLICATION LISTING FOR B11/N12 DISTRIBUTOR CAPS AND ROTORS
Federal Models: 1982-1983 (excluding Turbo)
California Models: 1982-1986 (excluding Turbo)
Federal Models: 1984-1986 (and all Turbo 1983-1984)
*This P/N contains rotor and new type shield plate which should be installed as a set. Shield plate does not require replacement if the new type shield plate has been previously installed.