Seat Belts - Extender Availability
87nissan12Models All Models
Section Body & Frame
Classification BF87-026
Bulletin No. TS87-114
Date July 27, 1987
FRONT SEAT BELT EXTENDERS, LONGER FRONT SEAT BELTS
This Technical Bulletin contains a complete list of seat belt extenders and longer seat belt sets currently available for use on all Nissan Models except 1987 Maxima vehicles with automatic seat belts. These assemblies should be used when body size or driving position do not allow for proper fit of the factory installed lap-shoulder belts. Use the information in this bulletin in place of that found in previously issued Technical Bulletin BF86-012 (TS86-082). Make note of this on page BF-30 of the 1986 Technical Bulletin Reprint Manual.
When a customer requests information regarding better fitting seat belts:
^ Inspect the original lap-shoulder belt assembly to ensure proper function. Refer to Section MA of the appropriate model Service Manual.
^ Inform the customer that the extenders/longer seat belts are designed for his/her specific use only. Individuals who can use the standard seat belt may not receive full restraint system protection when using an extender/longer belt.
^ If a longer belt is installed, return the old belt to the customer for use if and when the extended length belt is no longer required.
Listed below are the revised part numbers for the extenders and longer seat belts with the applied models. These belts should be provided to the customer free of charge, and should be ordered through the Parts Department system. They are available only in black.
I. EXTENDERS
PART NUMBER APPLIED MODEL
86848-01A00 *1974-78 B210 (NSK Warner) 1975-78 280ZX
1974-76 610 1976-78 F10
1974-77 710 1977-80 810
86848-01A01 1979-81 210 (2-Door) 1979-81 280ZX
1979-81 310
86848-01A02 1981 Maxima
I. EXTENDERS (CONTINUED)
PART NUMBER APPLIED MODEL
86848-01A03 1982 210 (2-Door) 1982-84 Maxima
1982 310 1982-83 280ZX
86848-01A04 1984-86 300ZX 1986-87 Stanza Wagon
1985-87 Maxima
86848-01A05 *1974-76 B210 (Takata)
1976-78 620
86848-01A06 *1977-78 B210 (Takata) 1979 Truck
1977-79 200SX
86848-01A07 1979-82 210 (4-Door)
1980-81 200SX
86848-01A08 1982.5-86 Sentra (4-Door) 1987 Pathfinder
1983-86 Pulsar (4-Door) **1983-87 Truck 1982-86 200SX (Applied date: prior to 2/86)
86848-01A09 1980-82 Truck
86848-01A10 1978-81 510
86848-01A11 1987 Sentra 1987 Van
1986-87 200SX (Applied Date: from 2/86)
86848-01A12 1987 Pulsar NX 1987 300ZX
1987 Stanza
II. LONGER SEAT BELTS (CONTINUED)
PART NUMBER APPLIED MODEL
86840-D0124 (R.H.) 1982-86 Stanza (4-Door/5-Door)
86841-D0124 (L.H.)
86840-D1024 (R.H.) 1982-84 Stanza (2-Door)
86841-D1024 (L.H.)
86840-37A24 (R.H) 1982.5-86 Sentra (2-Door)
Complete Belt Set ONLY 1983-86 Pulsar NX (2-Door)
86841-37A24 (L.H.) Complete Belt Set ONLY
* 1974-78 B210 - Two seat belt manufacturers were used: NSK Warner and Takata. Be sure to check the belt for the manufacturers name before ordering.
**No special extenders are available for 1984-1986 720 and some 1986.5 D21 U.S.A. produced trucks. However, the extender listed for 1983-1987 trucks on page 2/3 can be used if a replacement seat belt set is ordered from the parts catalogue as noted below:
1984-86 720 Truck
For U.S.A. produced 720 trucks (VIN prefix 1N6...) order the belt set for the equivalent Japanese produced 720 truck (VIN Prefix JN6...) and the extender listed on page 2/3 will fit. Do not order any replacement seat belt set with an "S" in the 6th digit of the part number. Example: For a 1984 Brown 2WD (K/Cab) order (Brown C-134) P/N 86840-10W11. Do not order (Brown C-134 USA make) P/N 86840-S3601.
1986.5 D21 Truck
Check the manufacturer's identification on the female buckle in the D21 truck. If the buckle is marked "TK - ", no new belt set is needed, just order the extender listed on page 2/3 of this bulletin. If the buckle is marked with "NSK/Warner", order the correct color replacement seat belt set (male and female halves) listed in the D21 parts catalog, and the extender listed on page 2/3 will fit. All replacement seat belt sets listed in the D21 catalog are compatible with the extender.
NOTE:
If an extender is needed for a U.S.A. produced 720 or D21 truck, the replacement seat belt set and the installation is available at no charge to the consumer.
WARRANTY INFORMATION
CS PNC CT OPERATION OP CODE FLAT RATE
9Y 868EX 99 Install Longer Belt SH99AA 0.4/hr.
9Y 868EX 99 Install Extender(s) SH16AA 0.2/hr.