Seat Belts - 3-Point Rear Belt Installation: Overview

89nissan04

Classification: Section:
BF89-004 Body & Frame
Reference:
TECHNICAL BULLETIN TS89-050
Models: Sentra, Stanza, Stanza Wagon, Pulsar Maxima, 200SX, 300ZX 2+2, Pathfinder Date:
March 30, 1989
3-POINT REAR SEAT BELT INSTALLATION


APPLIED MODELS: 1987-89 Sentra Sedan, Coupe and Wagon 1987-88 Sentra 3-Door Hatchback 1987-88 Stanza Sedan 1987-89 Pulsar 1985-87 Maxima Sedan 1984-88 200SX Hatchback 1986-89 Pathfinder


SERVICE INFORMATION

This bulletin describes 3-point rear seat belt installation procedures for the applied models listed above. These vehicles are already equipped with threaded fittings for installation of the 3-point belts. However, in most cases, it will be necessary to modify or replace certain trim pieces to complete the installation. Trim modification requires cutting/drilling of the quarter panel or trunk trim and, in some cases, the rear parcel shelf. The following pages describe the installation procedures for each model.

Please make these instructions available to customers who purchase retro-fit kits and choose to install the belts themselves. Ensure that a copy of the child seat installation instructions are provided to customers for every installation.


PARTS INFORMATION

The replacement parts necessary to complete the installation on each model are listed beginning on page 31 of this bulletin.