Fuel Filter: Service and Repair

WARNING: Before removing fuel filter, release fuel pressure from fuel line to eliminate danger.




1. Remove rear seat.
2. Start engine.
3. Disconnect fuel pump harness connector with engine running.
4. After engine stalls, crank engine two or three times to make sure that pressure is released.
5. Turn ignition switch off and connect fuel pump harness connector.




6. Loosen fuel hose clamps.
7. Replace fuel filter.

NOTE:
^ Do not reuse fuel hose clamps.
^ Be careful not to spill fuel over engine compartment. Place a rag to absorb fuel.
^ Use high pressure type fuel filter. Do not use a synthetic resinous fuel filter.