Tightening Specifications

Torque Chart:

Torque Chart (Cont.):

Head Loosening Sequence:

Rocker Shaft Torque Sequence:

Head Torque Sequence:

Cylinder Head Torque Procedure:

1. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
2. Tighten all bolts to 78 N.m (8.0 kg-m, 58 ft-lb).
3. Loosen all bolts completely.
4. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
5. Tighten all bolts to 74 to 83 N.m (7.5 to 8.5 kg-m, 54 to 61 ft-lb) or if you have an angle wrench, turn all bolts 90 to 95 degrees clockwise.