Engine Controls - Ignition Signal (Code 21) Inspection

87nissan06

Models 1987 200SX
Engine Fuel &
Section Emission Control

Classification EF&EC87-024

Bulletin No. TS87-194

Date December 21, 1987
IGNITION SIGNAL (ECU CODE 21) INSPECTION 1987 200SX SERVICE MANUAL CORRECTION

(Issued as TS87-180/BF87-033)


APPLIED MODELS: 1987 200SX

SERVICE INFORMATION

Attached to this bulletin at the time of distribution were amended versions of pages EF&EC-180 and EL-140 (July 1986 (07) printing) and page EL-140 (December 1986 (08) printing) of the 1987 200SX Service Manual. These amended pages contained corrected wiring diagram and/or harness layout connector identification information.

Shown below are the replacement instructions for the two sets of pages that were distributed with this bulletin.

IF YOU HAVE THE JULY 1986 (07) PRINTING:

1. Apply the attached amendment page labeled EF&EC-180 into your copy of the 1987 200SX Service Manual.

2. Apply the attached amendment page labeled EL-140 into your copy of the 1987 200SX Service Manual.

IF YOU HAVE THE DECEMBER 1986 (08) PRINTING:

1. Apply the attached amendment page labeled EL-140 into your copy of the 1987 200SX Service Manual.

2. Discard the amendment page labeled EF&EC-180 (the wiring diagram shown on EF&EC-180 of your Service Manual is correct).