Shift Control Components

1. Set up tool on adapter plate.
2. Remove check ball plugs, check springs, and check balls.




3. Drive out retaining pins. Then drive out fork rods and remove interlock balls.




4. Remove lever bracket securing bolt (mainshaft braking mechanism only).




5. Draw out 3rd - 4th fork rod (mainshaft braking mechanism only).




6. Remove E-ring from O.D.-rev. fork rod (mainshaft braking mechanism only).




7. Draw out O.D.-rev. fork shaft by rotating O.D.-rev. bracket counterclockwise (mainshaft braking mechanism only).