Lock Pillar Finisher - Loose

87nissan2

Reference: TECHNICAL BULLETIN TS87-087 Date: May 25, 1987

Classification: BF87-019 Section: Body & Frame Models: 1987 Pulsar NX
LOCK PILLAR FINISHER


APPLIED MODEL: 1987 Pulsar NX (N13)

SERVICE INFORMATION



The lock pillar finisher located at the "B" pillar in the 1987 Pulsar NX may be loose at the top or bottom. Gently pushing the finisher where it is loose should lock the clip in place. If the clip does not lock into place, remove the finisher and replace the three clips with modified clip (Part Number 01553-05881).

When installing the finisher to the vehicle, lock the clips into place in the following order:

1. Middle clip.

2. Top clip.

3. Bottom clip.