Control Assembly - Exc. Wagon

Fig. 10 Center dash panel removal.:

1. Disconnect battery ground cable.
2. Remove screws securing center dash panel, Fig. 10. Disconnect wiring harness connectors and remove panel.
3. Remove screws securing lower dash panels and remove panels.
4. Disconnect control cables at heater and blower case.
5. Remove bolt securing control ground strap and disconnect wiring harness connectors to control.
6. On models with push button control, disconnect vacuum harness to control.
7. Remove screws securing control and remove control assembly.
8. Reverse procedure to install, then adjust control cables.