Fuel Filter: Service and Repair

WARNING: Before removing fuel filter, release fuel pressure from fuel line to eliminate danger.




1. Remove fuse for fuel pump.
2. Start engine.
3. After engine stalls, crank engine two or three times to make sure that fuel pressure is released.
4. Turn ignition switch off and install fuse for fuel pump.





5. Loosen fuel hose clamps.
6. Replace fuel filter.

NOTE:
^ Be careful not to spill fuel over engine compartment. Place a shop towel to absorb fuel.
^ Use a high-pressure type fuel filter. Do not use a synthetic resinous fuel filter.
^ When tightening fuel hose clamps, check the condition of the hoses and do not over-tighten clamps.
^ Erase memory (Code No. 22) from control unit.