Cylinder Head

Apply oil to the thread portion and seat surtace of bolts and tighten cylinder head bolt; with washers.

Tightening procedure.
1st Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb).
2nd Tighten all bolts to 103 Nm (10.5 kg-m, 76 ft-lb).
3rd Loosen all bolts completely.
4th Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb).
5th Tighten all bolts to 103 Nm (10.5 kg-m, 76 ft-lb) or if you have an angle wrench, tighten bolts 85 to 90 degrees clockwise.