Bearing Retainer and Output Shaft
Bearing Retainer and Output ShaftINSPECTION
- Measure clearance between seal ring and ring groove.
Standard clearance: 0.10 - 0.25 mm (0.0039 - 0.0098 in)
Wear limit: 0.25 mm (0.0098 in)
INSPECTION
- Measure clearance between seal ring and ring groove.
Standard clearance: 0.10 - 0.25 mm (0.0039 - 0.0098 in)
Wear limit: 0.25 mm (0.0098 in)