Clutch Housing and Transmission Case

Input shaft oil seal




Note: Apply multi-purpose grease to seal lip of oil seal before installing.

Input shaft rear bearing




1. Remove welch plug from transmission case.




2. Remove input shaft rear bearing by tapping it from welch plug hole.




3. Install welch plug.

Note: Apply recommended sealant to mating surface of transmission case.




4. Install input shaft rear bearing.

Mainshaft front bearing outer race and oil channel




1. Remove mainshaft front bearing outer race.
2. Remove oil channel.




3. Install oil channel.

Note: Ensure that oil groove in oil channel always faces toward oil pocket when installing it on clutch housing.




4. Install mainshaft front bearing outer race.

Mainshaft rear bearing outer race. Adjustment
Differential side bearing outer race. Adjustment