Fuel Tank: Service and Repair

Fuel Pump Fuse:

1. Remove fuel pump fuse(located under the drivers side of the dash).
2. Turn the ignition to the start position for approximately 15 seconds (this will release the fuel pressure).

Fuel Tank Assembly:

3. Drain or syphon fuel into a suitable container.
4. Disconnect fuel lines.
5. Remove filler pipe securing screws.
6. Support fuel tank with suitable jack.
7. Remove fuel tank mounting screws.
8. Remove fuel tank electrical connections.
9. Using jack, lower tank from vehicle.
10. Reverse procedure to install.