Cylinder Head

Apply oil to the thread portion and seat surface of bolts and tighten cylinder head bolts with washers.

Tightening procedure.
1st Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb).
2nd Tighten all bolts to 78 Nm (8.0 kg-m, 58 ft-lb).
3rd Loosen all bolts completely.
4th Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb).
5th Tighten all bolts to 74 to 83 Nm (7.5 to 8.5 kg-m, 54 to 61 ft-lb) or if you have an angle wrench, turn bolt (8) 83 to 88 degrees and the other bolts 75 to 80 degrees clockwise.