Cylinder Block Assembly: Specifications
| Deck Surface Flatness | Standard | 0.0012 Inch (in) |
| Limit | 0.0039 Inch (in) | |
| Cylinder Bore Diameter (Standard) | Grade No. 1 | 3.4252-3.4256 Inch (in) |
| Grade No. 2 | 3.4256-3.4260 Inch (in) | |
| Grade No. 3 | 3.4260-3.4264 Inch (in) | |
| Wear Limit | 0.0079 Inch (in) | |
| Cylinder Bore Taper Maximum | 0.0004 Inch (in) | |
| Cylinder Bore Out of Round Maximum | 0.0006 Inch (in) | |
| Main Journal Inner Diameter | Grade No. 0 | 2.6238 - 2.6242 Inch (in) |
| Grade No. 1 | 2.6242 - 2.6245 Inch (in) | |
| Grade No. 2 | 2.6245 - 2.6249 Inch (in) | |
| Difference Between Cylinders | 0.0020 Inch (in) or less |