Removal And Installation

1. Disconnect battery ground cable, then raise and support vehicle.
2. Remove exhaust tube, then disconnect transmission harness connectors and clamps.
3. Remove dipstick tube, then disconnect transmission cooler lines from transmission and plug openings.
4. Disconnect control linkage from selector lever, then remove propeller shaft.
5. Remove starter motor if necessary, then the gusset attaching engine to transmission.
6. Remove bolts attaching torque converter to driveplate.
7. Support transmission assembly with a suitable jack and secure to jack, then remove rear mounting bracket from body and transmission assembly.
8. Remove bolts attaching transmission assembly to engine, then lower assembly and remove from vehicle.
9. Reverse procedure to install.