Repair Procedure 2

REPAIR PROCEDURE 2

1. Make sure that door corner finisher is fixed completely by the 3 clips.
2. If not, fix it completely.



3. If a clearance between door corner finisher and door weatherstrip exists although the above 3 clips are completely fixed, eliminate the clearance as follows:
a. Remove door finisher, door corner finisher and door mirror.
b. Remove door weatherstrip around door panel where door mirror is fixed.
c. Reinstall door corner finisher.



d. Bend door panel flange where door mirror is fixed so that the distance "D" between outer edge of door corner finisher and inner surface of flange is within specifications. Specified distance "D":
3.0 - 3.5 mm (0.118 - 0.138 in)



e. Apply butyl seal or equivalent around the 3 fixing clips or door corner finisher, and install it.