Repair Procedure 3

REPAIR PROCEDURE 3
1. Make sure that distance between door glass and door corner piece "X" is within specifications when door is opened. Specified distance "X":
4.0 - 6.0 mm (0.157 - 0.236 in)

2. If not, adjust window front guide rail (see "REPAIR PROCEDURE 5", page 8.)



3. Remove door finisher, door mirror finisher and door mirror.
4. Remove door weatherstrip around door panel where door mirror is fixed.



5. Add 2 pieces of insulating foam [width: 1 mm (0.04 in), length: 150 mm (5.91 in)] at door mirror flange, as shown above, to prevent the air from leaking.
6. Reinstall all parts removed.
7. Make sure front end of door window touches door weatherstrip completely.