Methods of Preventing Over Discharge

CAUTION:
a. If it becomes necessary to Start the engine with a booster battery and jumper cables, use a 12-volt booster battery.

b. After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.

c. Never add distilled water through the hole used to check specific gravity.

METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-discharging a battery.





- The battery surface (particularly its top) should always be kept clean and dry. If the top surface of a battery is wet with electrolyte or water, leakage current will cause the battery to discharge. Always keep the battery clean and dry.





- When the vehicle is not going to be used over a long period of time, disconnect the negative battery terminal. (If the vehicle has an extended storage switch, turn it off.)





- Check the charge condition of the battery. Periodically check the specific gravity of the electrolyte. Keep a close check on charge condition to prevent overdischarge.