Assembly

ASSEMBLY





1. Install inner snap ring into groove of knuckle.
2. Press new wheel bearing assembly into knuckle.

Maximum load P: 29 kN (3 ton 3.3 US ton 3.0 Imp ton)

CAUTION: Do not press inner race of wheel bearing assembly. Do not apply oil or grease to mating surfaces of wheel bearing outer race and knuckle.

3. Install outer snap ring into groove of knuckle.





4. Pack grease seal lip with multi-purpose grease.





5. Install outer grease seal.




6. Install inner grease seal.





7. Press wheel hub into knuckle.

Maximum load P: 49 kN (5 ton5 5.5 US ton5 4.9 Imp ton) Be careful not to damage grease seal.





8. Check bearing operation.

a. Add load P with press.

Load P: 49 kN (5 ton5 5.5 US ton, 4.9 Imp ton)

b. Spin knuckle several turns in both directions

c. Make sure that wheel bearings operate smoothly.