Cylinder Head

Tightening procedures
1. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
2. Tighten all bolts to 64 N.m (6.5 kg-m, 47 ft-lb).
3. Loosen all bolts completely.
4. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
5. Turn each bolt clockwise the specified number of degrees, or if an angle wrench is not available, tighten all bolts to 64 to 69 N.m (6.5 to 7.0 kg-m, 47 to 51 ft-lb).




Specified degrees:
Bolts A 80°
Bolts B 65°