Wheel Hub: Service and Repair

Fig. 4 Removing Tie Rod End:

Fig. 6 Exploded View Of Wheel Hub & Knuckle:

Fig. 5 Removing Knuckle Assembly.:

Refer to Fig. 6, when replacing wheel hub and knuckle assembly.
1. Remove wheel bearing locknut, then brake caliper.
2. Separate tie rod from knuckle using a suitable tool, Fig. 4.
3. Separate driveshafts from knuckle, remove knuckle attaching bolts as shown in Fig. 7, then knuckle.
4. Reverse procedure to install, tighten wheel bearing to specifications.