Engine Controls - ECM Identification
Classification: EF & EC 93-013Section: Engine Fuel
Reference: TECHNICAL BULLETIN NTB93-167
Models: Various
Date: November 16, 1993
ELECTRONIC CONTROL MODULE IDENTIFICATION
APPLIED MODELS:
SERVICE INFORMATION:
This bulletin contains a chart that lists the ECM Vendor serial number and cross-references to a Nissan part number. This chart is intended to be used as a reference guide to determine that a vehicle has the correct ECM installed in it. The parts catalog along with the VIN number and Date of Manufacture should be used to determine the correct part number when ordering a new ECM.
An ECM with a part number with 2371M-*****RE is a replacement ECM and should have the same programming as the original. If a vehicle has an ECM with a part number containing "M" and "RE", disregard the "M" and "RE" when using this chart.
On any CONSULT compatible vehicle the ECM part number can be accessed through the CONSULT connector using CONSULT. All other vehicles have a decal that has the vendor part number on the ECM cover.
ALTIMA (U13) KA24DE
AXXESS (M11) KA24E (2WD)
AXXESS (M11) KA24E (4WD)
MAXIMA (910) L24E
MAXIMA (U11) VG30E
MAXIMA (J30) VG30E, VE30DE
NX1600 (KB13) GA16DE
NX2000 (KB13) SR20DE
PULSAR (KN12) E15ET
PULSAR (KN13) E16i
PULSAR (KN13) CA16DE
PULSAR (KN13) CA18DE
PULSAR (KN13) GA16i
SENTRA (B12) E16i (2WD)
SENTRA (B12) E16i (4WD)
SENTRA (B12) GA16i (2WD)
SENTRA (B12) GA16i (4WD)
STANZA (T11) CA20E
STANZA (T12) CA20E
STANZA (U12) KA24E
STANZA WAGON (M10) CA20E (2WD)
STANZA WAGON M10 CA20E (4WD)
TRUCK (D21) Z24i (2WD)
TRUCK (D21) Z24i (4WD)
PATHFINDER (WD21) Z24i (2WD)
TRUCK/PATHFINDER (D21/WD21) VG30i
TRUCK (D21) KA24E
TRUCK/PATHFINDER (D21/WD21) VG30i
VAN (C22) Z241
200SX (S100) Z22E
200SX (S110) Z24E
200SX (S12) CA20E
200SX (S12) CA18ET
200SX (S12) VG30E
240SX (S13) KA24E
240SX (S13) KA24DE
240SX Convertible (S13) KA24DE
280Z (S30) L28E
280ZX (S130) L28E
280ZX (S130) L28ET
810 L24E
300ZX (Z31) VG30E
300ZX (Z31) VG30ET
300ZX (Z32) VG30DE
300ZX (Z32) VG30DETT