Tools - Consult Program Card Procedure Changes

Classification:
T&E96-005

Reference:
NTB96-039

Date:
May 22, 1996

CONSULT UE950 PROGRAM CARD PROCEDURE CHANGES

APPLIED VEHICLES:
All CONSULT compatible vehicles

SERVICE INFORMATION

It is necessary to perform two procedure changes when using the UE95O Program Card. The first is a change in the Freeze Frame data screen when performing emissions diagnosis. The second change is necessary when erasing a system to enable loading of a different system into CONSULT memory. Both procedural changes are described below.

SERVICE PROCEDURE

1. Freeze Frame Data Change When Performing Emissions Diagnosis





A. During emission system diagnosis using CONSULT and the UE95O Program Card, "Freeze Frame" information for items "PURG CONT/V & SN" and "PURG VOLUME CONT/V" are incorrectly labeled when displayed and/or printed. The following table provides the corrected information.

2. Erasing One System and Loading a Different System Into CONSULT Memory

A. When using CONSULT with the UE95O Program Card and there is a need to erase a system to make more memory space available to load a new system, selecting "ENGINE" to erase will cause a error message to appear. The unit will ask to install a UE941S Program Card that does not exist. To avoid this error message from occurring, do not select "ENGINE" as the system to erase.

B. To make memory space available, select any of the other systems displayed. Refer to the CONSULT system instruction change shown on this bulletin. Please pay special attention to Step 4.

How To Load a Different System Into CONSULT Memory





(Pictured are the CONSULT screens you will actually see)