A/T - Slipping or Improper Shifting

9217nissan01

Classification:
AT92-001

Section:
Automatic Transmission

Reference:
TECHNICAL BULLETIN NTB92-011


Models:
1991 30OZX, 240SX, Truck/Pathfinder

Date:
February 28, 1992


AUTOMATIC TRANSMISSION IMPROPER SHIFTING OR SLIPPING


APPLIED MODELS:
1991 30OZX (Non-Turbo), 240SX, and Truck/Pathfinder

APPLIED DATE:
May, 1991

SERVICE INFORMATION

Vehicles produced before the applied date may exhibit transmission slipping or improper shifting. These symptoms may be caused by insufficient torquing of the band servo retainer bolts.


SERVICE PROCEDURE

If a customer complains of unusual operation in overdrive or slipping in all upshifts, follow the procedure on Diagnostic Procedures.


WARRANTY INFORMATION

Operation 0p CS PNC CT S/T
Code
R&I pan, inspect, tighten JA9999 2A 31615 32 1.0 hrs.
band servo bolts as required


Note:
If additional component repair is required, please reference the "Warranty Flat Rate Manual" for the appropriate PNC/OP Code combinations.





Diagnostic Procedure