Parking Pawl Components

COMPONENTS

DISASSEMBLY




1. Slide return spring to the front of rear extension flange.




2. Remove return spring, pawl spacer and parking pawl from rear extension.
3. Remove parking pawl shaft from rear extension.




4. Remove parking actuator support and rod guide from rear extension.




INSPECTION
Parking pawl and parking actuator support
- Check contact surface of parking rod for wear.

ASSEMBLY




1. Install rod guide and parking actuator support onto rear extension.
2. Insert parking pawl shaft into rear extension.




3. Install return spring, pawl spacer and parking pawl onto parking pawl shaft.




4. Bend return spring upward and install it onto rear extension.