RL4F03A

Specifications and Adjustments - RL4F03A

General Specifications:

THROTTLE WIRE ADJUSTMENT
Throttle wire stroke: 39 - 43 mm (1.54 - 1.69 in.)

Vehicle Speed When Shifting Gears - Model 31X23:

Vehicle Speed When Performing Lock-up - Model 31X23:

Line Pressure - Model 31X23:

Stall Revolution:

Control Valve Return Springs:

Clutches And Brakes Part 1:

Clutches And Brakes Part 2:

Clutches And Brakes Part 3:

Clutch And Brake Return Springs:

Oil Pump:

Input Shaft:

Planetary Carrier:

FINAL DRIVE
Differential side gear clearance
Clearance between side gear and differential case with washer: 0.1 - 0.2 mm (0.004 - 0.008 in.)

Differential Side Gear Thrust Washers:

Differential case end play
Differential case end play: 0 - 0.15 mm (0 - 0.0059 in.)

Differential Side Bearing Adjusting Shims:

REDUCTION GEAR
Bearing preload
Differential side bearing preload "T": 0.04 - 0.09 mm (0.0016 - 0.0035 in.)

Turning torque
Turning torque of reduction gear: 0 11 - 069 N.m (1.1 - 7.0 kg.cm, 0.95 - 6.08 in.lb)

Reduction Gear Bearing Adjusting Shims:

Table For Selecting Reduction Gear Bearing Adjusting Shim:

OUTPUT SHAFT
Bearing preload
Output shaft bearing preload: 0.03 - 0.08 mm (0.0012 - 0.0031 in.)

Turning torque
Turning torque of output shaft: 0.25 - 0.88 N.m (2.5 - 9.0 kg.cm, 2.2 - 7.8 in.lb)

Seal Ring Clearance:

Output Shaft Bearing Adjusting Spacers:

Table For Selecting Output Shaft Bearing Adjusting Spacer:

BEARING RETAINER

Seal Ring Clearance:

TOTAL END PLAY
Total end play: 0.25 - 0.55 mm (0.0095 - 0.0217 in.)

Bearing Race For Adjusting Total End Play:

REVERSE CLUTCH END PLAY
Reverse clutch end play: 0.65 - 1.00 mm (0.0256 - 0.0394 in.)

Thrust Washers For Adjusting Reverse Clutch End Play:

ACCUMULATOR

O-ring:

Return Spring:

BAND SERVO

Return Spring:

REMOVAL AND INSTALLATION

Removal And Installation: