Service Data and Specifications (SDS)
Specifications and Adjustments - RL4F03VGeneral Specifications:
THROTTLE WIRE ADJUSTMENT
Throttle wire stroke: 39 - 43 mm (1.54 - 1.69 in.)
Vehicle Speed When Shifting Gears - Model 31X60:
Vehicle Speed When Performing Lock-up - Model 31X60:
Line Pressure - Model 31X60:
Stall Revolution:
Control Valve Return Springs:
Clutches And Brakes Part 1:
Clutches And Brakes Part 2:
Clutches And Brakes Part 3:
Clutch And Brake Return Springs:
Oil Pump:
Input Shaft:
Planetary Carrier:
FINAL DRIVE
Differential side gear clearance
Clearance between side gear and differential case with washer: 0.1 - 0.2 mm (0.004 - 0.008 in.)
Differential Side Gear Thrust Washers:
Bearing preload
Differential side bearing preload "T": 0.04 - 0.09 mm (0.0016 - 0.0035 in.)
Turning torque
Turning torque of final drive assembly: 0.49 - 1.08 N.m (5.0 - 11.0 kg.cm, 4.3 - 9.5 in.lb)
Differential Side Bearing Adjusting Shims:
Table For Selecting Differential Side Bearing Adjusting Shim(s):
REDUCTION GEAR
Bearing preload
Differential side bearing preload "T": 0.04 - 0.09 mm (0.0016 - 0.0035 in.)
Turning torque
Turning torque of reduction gear: 0.11 - 0.69 N.m (1.1 - 7.0 kg.cm, 0.95 - 6.08 in.lb)
Reduction Gear Bearing Adjusting Shims:
Table For Selecting Reduction Gear Bearing Adjusting Shim:
OUTPUT SHAFT
Seal Ring Clearance:
End play
Output shaft end play: 0 - 0.5 mm (0 - 0.020 in.)
Output Shaft Adjusting Shims:
BEARING RETAINER
Seal Ring Clearance:
TOTAL END PLAY
Total end play: 0.25 - 0.55 mm (0.0095 - 0.0217 in.)
Bearing Race For Adjusting Total End Play:
REVERSE CLUTCH END PLAY
Reverse clutch end play: 0.65 - 1.00 mm (0.0256 - 0.0394 in.)
Thrust Washers For Adjusting Reverse Clutch End Play:
ACCUMULATOR
O-ring:
Return Spring:
BAND SERVO
Return Spring:
REMOVAL AND INSTALLATION
Removal And Installation:
