Throttle Cable/Linkage

ACCELERATOR CABLE ADJUSTING NUT
Torque value 5.8 - 8 ft-lb (8 - 11 Nm)

AIR REGULATOR
Torque Value 6.2 - 8 ft-lb (8.4 - 10.8 N-m)

ENGINE IDLE SPEED
A/T (in "N" position) 800 ± 50 RPM
M/T 800 ± 50 RPM

FUEL INJECTOR
Torque value 2.2 - 2.8 ft-lb (2.9 - 3.8 Nm)

FUEL LINE CLAMP
Torque value 0.7 - 1.1 ft-lb (1 - 1.5 Nm)

FUEL RAIL
Torque value
1st step 6.9 - 8 ft-lb (9 - 11 Nm)
2nd step 15 - 20 ft-lb (21 - 26 Nm)

FUEL TANK MOUNTING
Torque value 20 - 26 ft-lb (27 - 35 Nm)

FUEL PUMP MOUNTING
Torque value 2.4 - 3.1 ft-lb (3.2 - 4.2 Nm)

IDLE AIR ADJUSTING UNIT
Torque value 6.2 - 8 ft-lb (8.4 - 10.8 Nm)

INTAKE COLLECTOR
Torque value 13 - 15ft-lb (18 - 21 Nm)

THROTTLE CHAMBER
Torque value [1]
1st step 6.5 - 8 ft-lb (9 - 11 Nm)
2nd step 13 - 16 ft-lb (18 - 22 Nm)

THROTTLE DRUM
Torque value 13 - 16 ft-lb (18 - 22 Nm)

[1] Refer to COMPONENT REPLACEMENT AND REPAIR PROCEDURES for torque sequence.