Cylinder Head

Install cylinder head with new gasket and tighten cylinder head bolts in numerical order.

Note: Do not rotate crankshaft and camshaft separately, or valves will hit piston heads.

Tightening procedure
1. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
2. Tighten all bolts to 78 N.m (8.0 kg-m, 58 ft-lb).
3. Loosen all bolts completely.
4. Tighten all bolts to 29 N.m (3.0 kg-m, 22 ft-lb).
5. Turn all bolts 80 to 85 degrees clockwise with an angle wrench, or if an angle wrench is not available, tighten all bolts to 74 to 83 N.m (7.5 to 8.5 kg-m, 54 to 61 ft-lb).