Removal And Installation

Removal




1. Remove battery and bracket.
2. Remove air cleaner box with air flow meter.
3. Remove air duct.
4. Remove A.I.V. unit.
5. Remove clutch operating cylinder from transaxle.
6. Remove clutch hose clamp.
7. Disconnect speedometer pinion and position switch connectors.
8. Remove transaxle breather hose clamp.




9. Remove starter motor from transaxle.




10. Remove shift control rod from transaxle.
11. Drain gear oil from transaxle.
12. Remove exhaust front tube.




13. Draw out drive shafts from transaxle.




14. Support engine by placing a jack under oil pan.

CAUTION: Do not place jack under oil pan drain plug

15. Remove rear and L.H. mounts.
16. Remove bolts securing transaxle.
17. Lower transaxle while supporting it with a jack.

Installation







1. Tighten bolts securing transaxle.