Tightening Specifications

Refer to the illustration and tighten the cylinder head bolts using the following procedure:
a. Tighten all bolts to 29 Nm (22 ft. lbs.).
b. Tighten all bolts another 79 Nm (59 ft. lbs.).
c. Loosen all the bolts completely.
d. Tighten all bolts to 25 - 34 Nm (18 - 25 ft. lbs.).
e. Turn all bolts 86 to 91° clockwise. If an angle wrench is not available, tighten bolts to 75 - 84 Nm (55 - 62 ft. lbs.).