With Antilock Brakes

Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
1. Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
2. Connect hose to bleeder valves, then depress brake pedal several times.
3. With pressure applied to pedal open bleeder valve to release air trapped in system.
4. Close bleeder, then release pedal slowly.
5. Repeat steps 3 and 4 as outlined above until all air is removed from system.
6. Bleed air from system in order as follows:
a. Left rear wheel.
b. Right rear wheel.
c. Left front wheel.
d. Right front wheel.
e. Front air bleeder on ABS actuator.
f. Rear air bleeder on ABS actuator.