Rear Wheel

Fig. 1 Measuring Toe-in:

Fig. 4 Rear Toe-in Adjustment.:

On models with independent rear suspension, rear toe is the measurement of the rear wheels in relation to the vehicle centerline, Fig. 1. The leading edge of each rear wheel should toe-in slightly toward the vehicle centerline to ensure proper vehicle tracking. Rear toe should be inspected using suitable alignment gauges, following manufacturer's instructions. When checking or adjusting rear toe, always ensure the amount that the left and right wheels toe-in is as equal as possible.

Models Less Four Wheel Steering

1. Measure toe-in following equipment manufacturer's instructions.
2. Adjust toe-in by turning adjusting pin. Each graduation of adjusting pin equals .059 inch, Fig. 4.
3. Torque adjusting bolt to 51-65 ft. lbs.

Models With Four Wheel Steering

Rear toe-in can be adjusted by adjusting power cylinder lower links.

1. Measure toe-in for each wheel following equipment manufacturer's instructions.
2. Adjust toe in by adjusting lengths of power cylinder lower links.
3. After adjustment is complete, ensure both lower links are the same length.