RL4F03A

Specifications and Adjustments - RL4F03A

General Specifications:

Throttle wire stroke: 39 - 43 mm (1.54 - 1.69 in.)

Vehicle Speed When Shifting Gears - Model 31X23:

Vehicle Speed When Performing Lock-up - Model 31X23:

Stall Revolution:

Line Pressure - Model 31X23:

FINAL DRIVE

Differential side gear clearance
Clearance between side gear and differential case with washer: 0.1 - 0.2 mm (0.004 - 0.008 in.)

Differential Side Gear Thrust Washers - Model 31 X 23:

Differential Side Gear Thrust Washers - Model 31 X 60:

Differential case end play
Differential case end play: 0 - 0.15 mm (0 - 0.0059 in.)

Differential Side Bearing Adjusting Shims:

REDUCTION GEAR
Reduction gear bearing preload: 0.05 mm (0.0020 in.)
Turning torque of reduction gear: 0.11 - 0.69 N.m (1.1 - 7.0 kg.cm, 0.95 - 6.08 in.lb)

Reduction Gear Bearing Adjusting Shims:

Table For Selecting Reduction Gear Bearing Adjusting Shim:

OUTPUT SHAFT
Output shaft bearing preload: 0.03 - 0.08 mm (0.0012 - 0.0031 in.)
Turning torque of output shaft: 0.25 - 0.88 N.m (2.5 - 9.0 kg.cm, 2.2 - 7.8 in.lb)

Seal Ring Clearance:

Output Shaft Bearing Adjusting Spacers:

Table For Selecting Output Shaft Bearing Adjusting Spacer:

Control Valve Return Springs:

Clutches And Brakes Part 1:

Clutches And Brakes Part 2:

Clutches And Brakes Part 3:

Clutch And Brake Return Springs:

Oil Pump:

Input Shaft:

Planetary Carrier: