Rear Wheel

Fig. 1 Measuring Toe-in:

Rear toe is measurement of rear wheels in relation to vehicle centerline, Fig. 1. leading edge of each rear wheel should toe-in slightly toward vehicle centerline to ensure proper vehicle tracking. Rear toe should be inspected using suitable alignment gauges, following manufacturer's instructions. When checking or adjusting rear toe, always ensure amount that left and right wheels toe-in is as equal as possible.

Fig. 4 Rear Toe-in Adjustment.:

LESS FOUR WHEEL STEERING
1. Measure toe-in following equipment manufacturer's instructions.
2. Adjust toe-in by turning adjusting pin. Each graduation of adjusting pin equals 0.059 inch, Fig. 6.
3. Torque adjusting bolt to 51-65 ft. lbs.


WITH FOUR WHEEL STEERING
Rear toe-in can be adjusted by adjusting power cylinder lower links.
1. Measure toe-in for each wheel following equipment manufacturer's instructions.
2. Adjust toe in by adjusting lengths of power cylinder lower links.
3. After adjustment is complete, ensure both lower links are same length.