With Consult Scan Tool

The self-diagnosis results can be read by CONSULT, as follows:





1. Connect "CONSULT" to vehicle harness connector.
2. Turn ignition switch to "ON". (When CONSULT is connected, the "AIR BAG" warning lamp will be turned to present diagnosis mode.)
3. Touch "START" to operate "CONSULT".





4. Touch "AIR BAG" to choose air bag system.
5. Touch "SELF DIAG RESULTS" to read self-diagnosis results.
6. Problem codes are displayed on "SELF DIAG RESULT 1" (present mode). The problem code last indicated is displayed on "SELF DIAG RESULT 2" (initial mode).
7. When "PRINT" is pressed, information displayed on "SELF DIAG RESULTS 1 and 2" is printed out.
8. After repairing malfunctioning parts, press "ERASE" to clear self-diagnosis results.
- After repairing malfunctioning parts, attempt to clear self- diagnosis results from memory.
- If malfunctioning parts are not completely repaired, self- diagnosis results remain stored in memory.
9. Push Back Key of CONSULT until SELECT SYSTEM mode appears to make "SELF-DIAGNOSIS" user mode.
10. Push the power off switch.
11. Turn off ignition switch.

Self Diagnosis Results:

Self-diagnosis results