Step 2 - Sensor Checks
Self-Diagnosis Step 2 - Sensor Circuits Shorts And Opens:
PURPOSE
This step checks the operation of every sensor circuit for a short or open condition.
OPERATION
NOTE: It takes about 4 seconds for the self-diagnostic system to check all sensors.
If a sensor circuit is open, the corresponding number blinks on the LED display. If a sensor circuit is shorted, the number will be preceded by a "-" mark.
If two or more sensor circuits malfunction, corresponding code numbers blink two times.
LIST OF SENSOR CODES AND CONDITIONS
NOTE: A code 20 will display when all sensor circuits check OK.