Without Scan Tool

SELF-DIAGNOSIS USING THE WARNING LAMP

Self-diagnosis results can be also read by using the "AIR BAG" warning lamp. The "Air bag" warning lamp operates as shown below:

How to alternate self-diagnosis





Problem codes are displayed in present diagnosis mode (self-diagnosis result 1). The problem code last indicated is displayed in initial diagnosis mode (self diagnosis result 2).


After the malfunctioning parts have been repaired and the system is returned to the user mode, the present diagnosis mode information, displayed as self-diagnosis results, is automatically cleared from memory.
- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.
- If a malfunctioning part is not completely repaired, information stored in memory will not be cleared.













Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes �. Refer to Table.

Warning lamp flashing times and repair