High Clutch
DIMENSIONSClutch and Brake Return Springs:
Free Length 19.7 mm (0.776 inch)
Outer Diameter 11.1 mm (0.437 inch)
Retaining Plate And Snap Ring Clearance:
Standard 1.4 - 1.8 mm (0.055 - 0.071 inch)
Allowable Limit 2.4 mm (0.094 inch)
Seal Ring And Ring Groove Clearance:
Standard Clearance 0.08 - 0.23 mm (0.0031 - 0.0091 inch)
Allowable Limit 0.23 mm (0.0091 inch)
Thickness of Drive Plate:
Standard Value 2.0 mm (0.079 inch)
Wear Limit 1.8 mm (0.071 inch)
Thickness Of Retaining (Plates Part No. And Thickness):
31537-31x11 3.8 mm (0.150 inch)
31537-31x12 4.0 mm (0.157 inch)
31537-31x13 4.2 mm (0.165 inch)
31537-31x14 4.4 mm (0.173 inch)
31537-31x15 4.6 mm (0.181 inch)
31537-31x16 4.8 mm (0.189 inch)
GENERAL
No. Of Drive Plates 3
No. Of Driven Plates 5