Crankshaft, Engine

Crankshaft:
Standard Journal Diameter:
Main Bearing [12]
Crank Pin [13]

Out Of Round [01] 0.0002
Taper [01] 0.0002

Bearing Clearance:
Main Bearings 0.0002-0.0009
Connecting Rod Bearings 0.0008-0.0018

Connecting Rods:
Piston Pin Bore Diameter 0.9835-0.9843
Side Clearance 0.0079-0.0138

[01] -- Maximum.
[12] -- Grade 0, 2.1643-2.1646 inch; grade 1, 2.1641-2.1643 inch; grade 2, 2.1639-2.1641 inch; grade 3, 2.1636-2.1639 inch.
[13] -- Grade 0, 1.8885-1.8887 inch; grade 1, 1.8883-1.8885 inch; grade 2, 1.8880-1.8883 inch.

NOTE: All Measurements are given in inches unless otherwise specified.