Manual Shaft and Throttle Lever

REMOVAL




1. Remove detent spring from transmission case.




2. Drive out manual plate retaining pin.




3. Drive and pull out parking rod plate retaining pin.
4. Remove parking rod plate from manual shaft.
5. Draw out parking rod from transmission case.




6. Pull out manual shaft retaining pin.
7. Remove manual shaft and manual plate from transmission case.




8. Remove manual shaft oil seal.

INSPECTION
- Check component parts for wear or damage. Replace it necessary.

INSTALLATION




1. Install manual shaft oil seal.
- Apply A.T.F. to outer surface of oil seal.




2. Install manual shaft and manual plate.




3. Align groove of manual shaft and hole of transmission case.
4. Install manual shaft retaining pin.




5. Install parking rod to parking rod plate.
6. Set parking rod assembly onto manual shaft.




7. Drive in manual plate retaining pin and parking rod plate retaining pin.




8. Install detent spring.