Automatic Transmission/Transaxle

General Specifications:

General Specifications

Specifications and Adjustments

Vehicle Speed When Shifting Gears - RL4F03A:

Vehicle Speed When Shifting Gears - RE4F03V:

VEHICLE SPEED WHEN SHIFTING GEARS

Vehicle Speed When Performing Lock-up - RL4F03A:

Vehicle Speed When Performing Lock-up - RE4F03V:

VEHICLE SPEED WHEN PERFORMING LOCK-UP

Line Pressure - RL4F03A:

Line Pressure - RE4F03V:

LINE PRESSURE

Stall Revolution:

STALL REVOLUTION

THROTTLE WIRE ADJUSTMENT
Throttle wire stroke mm (in) 40 - 42(1.57 - 1.65)

Control Valves - RL4F03A:

Control Valves - RE4F03V:

CONTROL VALVES
Control valve return springs

CONTROL VALVES - RE4F03A -

Clutches And Brakes Part 1:

Clutches And Brakes Part 2:

Clutches And Brakes Part 3:

CLUTCHES AND BRAKES

Clutch And Brake Return Springs:

Clutch And Brake Return Springs

Oil Pump:

Oil Pump

Input Shaft:

Input Shaft

Planetary Carrier:

Planetary Carrier

FINAL DRIVE - RL4F03A -

Differential side gear clearance
Clearance between side gear and differential case with washer mm (in) 0.1 - 0.2 (0.004 - 0.008)

Differential Side Gear Thrust Washers:

Differential Side Gear Thrust Washers

Differential case end play
Differential case end play mm (in) 0 - 0.15 (0 - 0.0059)

Differential Side Bearing Adjusting Shims:

Differential Side Bearing Adjusting Shims

FINAL DRIVE - RE4F03V -

Differential side gear clearance
Clearance between side gear and differential case with washer mm (in) 0.1 0.2 (0.004 - 0.008)

Differential Side Gear Thrust Washers:

Differential Side Gear Thrust Washers

Bearing preload
Differential side bearing preload "T" mm (in) 0.04 - 0.09 (0.0016 - 0.0035)

Turning torque
Turning torque of final drive assembly N.m (kg-cm, in-lb) 0.49-1.08 (5.0 - 11.0 4.3 - 9.5)

Differential Side Bearing Adjusting Shims:

Differential Side Bearing Adjusting Shims

Table For Selecting Differential Side Bearing Adjusting Shim(s):

Table For Selecting Differential Side Bearing Adjusting Shim(s)

REDUCTION GEAR

Bearing preload
Reduction gear bearing preload mm (in) 0.05 (0.0020)

Turning torque
Turning torque of reduction gear N.m (kg-cm, in-lb) 0.11-0.69 (1.1 - 7.0, 0.95-6.08)

Reducing Gear Bearing Adjusting Shims:

Reducing Gear Bearing Adjusting Shims

Table For Selecting Reduction Gear Bearing Adjusting Shim:

Table For Selecting Reduction Gear Bearing Adjusting Shim

OUTPUT SHAFT -- RL4F03A--

Seal Ring Clearance:

Seal Ring Clearance

Bearing preload
Output shaft bearing preload mm (in) 0.03 - 0.08 (0.0012 - 0.0031)

Turning torque
Turning torque of output shaft N.m (kg.m in-lb) 0.25 - 0.88 (2.5 - 9.0, 2.2 - 7.8)