Collision Diagnosis

COLLISION DIAGNOSIS

SRS INSPECTION:

To repair the SRS "AIR BAG", perform the following steps.

When air bag deployed in a collision:
1. Replace the diagnosis (control) unit.
2. Remove the air bag module.
3. Check the SRS components using the table shown below:

- If the SRS components are showing any visible damage such as dents, cracks,or deformation, replace them with new ones.

4. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp to ensure entire SRS operates properly except open circuits of air bag module and seat belt pre-tensioners.
5. Install new air bag module and seat belt pre-tensioners.
6. Conduct self-diagnosis again.



When air bag did not deploy in a collision:
1. Check the SRS components using the table shown below:

- If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones.

2. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp to ensure entire SRS operates properly.