Overhaul

Overhaul - Push Control Assembly:

1. Remove fresh vent assembly.

Overhaul - Push Control Assembly:

2. Remove two knobs.
Wrap knobs with a cloth and pull in direction indicated by arrow as shown in figure at left. Be careful not to scratch knobs during removal.

Overhaul - Push Control Assembly:

3. Disconnect illumination harness connectors.

Overhaul - Push Control Assembly:

4. Remove control base.
Undo hook at each end of control box and remove control base from control box by moving it in direction indicated by arrow.

Overhaul - Push Control Assembly:

5. Remove fan switch.

Overhaul - Push Control Assembly:

6. Remove illumination bulb.
7. Remove control knobs.
Wrap finisher with a cloth and remove knobs using pliers or similar tool.
Be careful not to scratch finisher's surface.
8. Remove control case.
9. Remove illumination plate.
Be careful not to scratch control amp. when removing illumination plate.
10. Remove finisher plate.
11. Remove control amp.
Be careful not to damage substrate when removing.
12. Disconnect temperature control cable.
13. Installation is in reverse order of removal.