Data Monitor Mode

Consult Data Monitor Mode 1 Of 3:

Consult Data Monitor Mode 2 Of 3:

Consult Data Monitor Mode 3 Of 3:

DATA MONITOR MODE

Remarks:
^ The monitor item marked "*" is applicable to M/T models only.
^ Specification data are reference values.
^ Specification data are out-put/in-put values which are detected or supplied by Engine Control Module (ECM) at the connector.
^ Specification data may not be directly related to their components signals/values/operations.

^ Adjust ignition timing with a timing light before monitoring IGN TIMING, because the monitor may show the specification data in spite of the ignition timing being not adjusted to the specification data. This IGN TIMING monitors the calculated data by ECM according to the input signals from camshaft position sensor and other ignition timing related sensors.