Component Testing Procedures

Injector Testing:

No. 2, No. 4 and No. 6 cylinders
1. Disconnect injector harness connector.
2. Check resistance between terminals as shown in the figure.
Resistance: 10 - 14Ohms
If NG, replace injector.

Injector Testing:

No. 1, No. 3 and No. 5 cylinders
1. Disconnect sub-harness connector for injectors.

Injector Specifications:

2. Check resistance between terminals as shown in the figure.
Resistance: 10 - 14Ohms
If NG, replace injector.