Component Testing Procedures
Injector Testing:
No. 1, No. 3 and No. 5 cylinders
1. Disconnect injector harness connector.
2. Check resistance between terminals as shown in the figure.
Resistance: 10 - 14 Ohms
If NG, replace injector.
No. 2, No. 4 and No. 6 cylinders
1. Disconnect middle harness connector for injectors.
Injector Testing:
Injector Specifications:
2. Check resistance between terminals as shown in the figure.
Resistance: 10 - 14 Ohms
If NG, replace injector.