Without Scan Tool

USING THE WARNING LAMP






Self-diagnosis results can be also read by using the "AIR BAG" warning lamp.

The "Air bag" warning lamp operates as shown below:










Problem codes are displayed in present diagnosis mode (self-diagnosis result 1). The problem code last indicated is displayed in initial diagnosis mode (self-diagnosis result 2). After the malfunctioning parts have been repaired and the system is returned to the user mode, the present diagnosis mode information, displayed a self-diagnosis results, is automatically cleared from memory
- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.
- If a malfunctioning part is not completely repaired, information stored in memory will not be cleared.











Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes. Refer to Table in Trouble Code Descriptions.

AIR BAG WARNING LAMP FLASH CODES AND REPAIRS:

Warning Lamp Flash Codes